Akai MPC 4000 hard drive issues, IDE 4K , audible beeping, Fat 32 Formatting, ARGGG!

Posted: September 5, 2013 in Uncategorized

So, to make a long story short. Dealing with hard drives for drum machines can be terrible.

I had bought an Akai MPC 4000 on craigslist years ago. It was sick, there were chiptunes, hard hitting drum beats, strange shit and so on.

I knew I wanted to back everything up so begins the journey.

I tried putting a USB flash drive on the front USB. It recognized it, but the device would not allow me to save to the flash drive, even though there was enough space. ( The MPC 4K seems to like loading samples from the USB instead of saving to it)

Next, I tried hooking the 4k USB on the back to my PC. I don’t fully remember what it did, but I know I couldn’t get anything to transfer.

I then tried hooking it up to my macbook, and download the akai.sys http://www.akaipro.com/mpc4000 , which did connect. I was able to see the files, however, I could not figure out how to copy the files over to the mac. So, after a while, I figured it would not let me do such things.

I thought I tried to diligently get the samples off my hard disk, and boy was I wrong.

About a month ago, I tried turning on the 4K and I noticed something was a miss. The device turned on, however it would not load properly, and there was an audible sound coming from the hard drive. My heart sank, I knew the hard drive had severe issues. I hoped that I could try turning off the machine and turn it back on and get it working. Unfortunately not. The hard drive died completely. There was some kind of beeping every couple seconds.

I tried and tried to get the hard drive working, but either the head is off the track or the head is not reading. I looked into a few different options for hard drive recovery, but they were all too much money. Although, there is a promising lead on reddit for no charge….

Anywho, I delved into my selection of older hard drives, and found a 3.5 IDE 60 gb older hard drive from a former computer. This was an obvious choice, as it was from a family computer, free and working.

I had to find a USBto IDE cable and power adapter, which powers the hard drive and converts the IDE to USB so the computer can read and edit the hard disk. I finally got the hard drive working, however it had to be fat 32 for the 4k to read the disk. I am using a Windows 7 laptop, and apparently it will no longer do FAT 32 formats, and the partitions can only be a certain size. I think it is 32 gb?

I tried a few programs for formatting hard disks, and I had a few issues getting it to work. First it was formatted wrong. Then I tried to plug it into the 4k and have the machine format it, but that was having issues as well. I finally settled on the smaller drive so it wouldn’t have to have more than one partition (although maybe that wouldn’t have been a problem) I managed to place folders of drum kits on the hard disk and then I installed it into the 3k. It has a single power plug and the IDE cable that is attached to the motherboard. It is very simply to remove and install the IDE hard disk once the 4k is opened.

I started opening the folders, and loading them, and then creating new programs for the 4k. You have to create a new program first and then you can start saving a program. More on this later.

Bottom line:

Next time I get a 4k or other disk based system, I will probably physically take out the hard drive, and copy everything to an external disk, as well as a flash drive or DVD, so if this happens again, I don’t have to worry….

This whole ordeal, took a huge amount of time, and frustrated me immensely. If I had just taken my own advice, I could have just forgotten about the disk, and put a new one in!

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s